Medusa to Autocad dxf file translation

prafulln · Post by **prafulln** » Fri May 13, 2005 1:28 am

I have some Medusa files (.SHE format) I want to translate these files to Autocad DXF format

Is there any direct translator available ??

can anybody guide me about this.

Post by **Don** » Fri May 13, 2005 10:15 am

Yes, no problem. A batch translator comes with a 2D draft license to translate to DXF or DWG.

prafulln · Post by **prafulln** » Fri May 20, 2005 1:19 am

an u give me a detailed info abt this batch migration programe

Reg,

Prafull

BrentWilkerson · Post by **BrentWilkerson** » Mon Aug 22, 2005 11:10 am

We have some DXF files that we got from one of our plants in Germany. Anyways everytime we receive them, including this time, the dimensions with geometric tolerancing, diameter and degree symbols etc. etc. will not show up. The font that is used is called medtext.shx.

So we had a German engineer here we have onsite to contact them for this font file. Do their response was that it is a conversion problem from Medusa to AutoCAD DXF format. I tried to change the font to different fonts such GDT, AMDGDT, etc... but no luck. The diameter symbol shows up as %%129

Example what should be runout of 0.01 to A shows up like this:
%%130%%u%%o%%164%%1680.01%%168A%%u%%o%%131

So if anyone has this medtext.shx font file or knows a work around it would be great!!

TIA

Please email me....

brent(dot)wilkerson(at)fmo(dot)com

AlemJohnson · Post by **AlemJohnson** » Fri Sep 16, 2011 12:06 pm

I tried translating my medusa files to Autocad DXF format using this batch migration programe but it didn't worked.

alphito · Post by **alphito** » Mon Nov 09, 2015 8:00 am

Hallo, um frühere AutoCAD.dwg's in MEDUSA weiter zu bearbeiten ( Datei/Importieren ) habe ich vom MEDUSA-Support folgendes file heruntergeladen :
/Downloads/csgdwgdxfconverter.exe ; nun weiss ich damit nicht weiter; versuchte im Linux-ubuntu das .exe zu installieren/aktivieren (Archivverwaltung etc.) doch da tut sich nichts. Kann mier jemand einen Tipp geben ?
Danke für Antwort /alphito

TDerksen · Post by **TDerksen** » Mon Nov 09, 2015 8:33 am

Hallo,
der Converter läuft leider nur unter Windows.

alphito · Post by **alphito** » Mon Nov 09, 2015 9:34 am

Danke für den klaren Bericht - aber natürlich schade so ! Entsprechender Verweis im Supportangebot - "nur unter Windows" wäre erwünscht ...
- z.Z. verfüge ich weder über Windows noch AutoCAD - Muss ich meine .dwg's "auswärts" in das .dxf transponieren ? (Möglichkeit dazu ist vorhanden). Jedenfalls besten Dank ! /alphito

http://forum.medusa4.com