uffdaken wrote:New to Medusa4. I was wondering if it possible with Medusa4 Personal to make a symbol that contains data that can be changed similar to the welding and surface roughness symbols. Would like to make a cross symbol with data input in the 4 quadrants used in aircraft fastener codes in the US. (National Aerospace Standards 523)
It is certainly possible. You can save any part of Medusa sheet in a named file and paste the contents of that file into another sheet later. So if the data you need in the symbol is a constant set of values that's pretty easy to set up. If an item in there needs changing after putting it onto a sheet then it's a normal Edit operation.
If you want to have a dialogue box come up so you can set the data values before putting the symbol onto the sheet then that is also possible. But requires more knowledge of customising Medusa to set up.
As NAS 523 appears to cost $69 currently, could you fake up an example of what you need and post it here? That would give us a better idea of the possibilities.